Chipping wood of up to 310 mm in diameter

TP 310 PTO K Is a combination of a TP Park and TP FOREST chipper. To obtain the optimal solution when chipping branches handled by crane, we have taken the best from the two lines and combined in one chipper. The rotor in the TP 310 is designed as the one used in TP 400. The cutting angle is 90 degrees and the rollers are horizontal, which is characteristic of the machines in the TP Park lines. TP 310  is towed by the tractor, which opens the possi-bility to pull a trailer to collect the wood chips.

• Hydraulic turnable spout with electric tilt of outlet
• Heavy build crane funnel
• 2 x hydraulically powered feed rollers with aggressive teeth in hardened steel
• Hydraulic compression of upper roller
• Crane support for Mowi P30 and Mowi 400
• Wheels 520/50-17with shaft prepared for brakes
• 2 x hydraulic support legs for stabilization during chipping
• Hitch (40 mm), with hydraulic and 12 V
• Waltersheid PTO shaft with freewheel L = 1,410 mm, tractor side 21x1 3 / 8 “or 6x1 3 /4” eller 6x1 3/4”
• Control unit and TP PILOT K for operating the unit from the cab